Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011
[ Back ]   [ More News ]   [ Home ]
Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011

NEW YORK, Aug. 4, 2011 — (PRNewswire) — Reportlinker.com announces that a new market research report is available in its catalogue:

Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011

http://www.reportlinker.com/p0590037/Asia-Pacific-Markets-for-Dental-Prosthetics-and-CAD/CAM-2011.html#utm_source=prnewswire&utm_medium=pr&utm_campaign=Dental_Equipment

In 2010, the total Asia-Pacific markets for dental prosthetics (made up of Japan, South Korea and Australia) were valued at $6.4 billion, a 0.1% increase over the previous year. The overall market CAD/CAM Prosthetics is estimated to grow at a double-digit rate over the forecast period.

The market segments covered in this report include:

• Crowns,

• Bridges,

• Inlays/Onlays,

• Veneers,

• Dentures,

• CAD/CAM System,

• CAD/CAM Prosthetics,

• CAD/CAM Blocks

Within the dental prosthetics and CAD/CAM market, companies such as Sirona, Nobel Biocare, 3M Espe and Degudent lead the market, among many others. This report provides a comprehensive and detailed analysis of market revenues by device type, market forecasts through 2017, unit sales, average selling prices, market drivers and limiters and a detailed competitive analysis, including manufacturer market shares and product portfolios.

TABLE OF CONTENTS

EXECUTIVE SUMMARY... 1

1.1 TOTAL ASIA-PACIFIC DENTAL PROSTHETICS AND CAD/CAM DEVICE MARKET....... 1

1.2 CAD/CAM PROSTHETICS MARKET...... 2

1.3 CAD/CAM BLOCK MARKET.... 3

1.4 TREND ANALYSIS BY COUNTRY........... 4

1.5 TREND ANALYSIS BY SEGMENT ........... 5

1.6 DENTURE MARKET ....... 6

1.7 CAD/CAM SYSTEM MARKET .. 7

1.8 COMPETITIVE ANALYSIS .......... 8

RESEARCH METHODOLOGY..... 9

2.1 RESEARCH SCOPE ......... 9

2.2 IDATA'S 9-STEP METHODOLOGY ......... 9

Step 1: Project Initiation & Team Selection ... 10

Step 2: Prepare Data Systems and Perform Secondary Research...... 11

Step 3: Preparation for Interviews & Questionnaire Design . 12

Step 4: Performing Primary Research 13

Step 5: Research Analysis: Establishing Baseline Estimates . 15

Step 6: Market Forecast and Analysis 15

Step 7: Identify Strategic Opportunities ......... 17

Step 8: Final Review and Market Release ...... 18

Step 9: Customer Feedback and Market Monitoring.. 19

INTRODUCTION TO DENTAL PROSTHETICS.......... 20

3.1 DENTAL HEALTH STATISTICS IN ASIA-PACIFIC ......... 20

3.2 CROWNS AND BRIDGES........... 21

3.2.1 Crowns...... 21

3.2.2 Bridges...... 21

3.2.2.1 Material Types.........21

3.2.3 Inlays/Onlays ........ 23

3.2.3.1 Material Types.........23

3.2.4 Veneers ..... 23

3.2.4.1 Material Types.........23

3.2.5 Dentures.... 24

3.2.5.1 Full Dentures...........24

3.2.5.2 Partial Dentures ......24

3.2.6 Manufacturing Process and Technological Developments .......... 24

3.2.6.1 Conventional Fabrication....24

3.2.6.2 CAD/CAM Technology ........25

3.2.6.3 Rapid Prototyping....25

3.2.6.4 Intra-Oral Digital Impression-Taking .........26

ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET...... 27

4.1 INTRODUCTION ........... 27

4.2 CURRENCY EXCHANGE RATE. 28

4.3MARKET OVERVIEW... 29

4.4MARKET ANALYSIS AND FORECAST .. 33

4.5MARKET BY SEGMENT 35

4.5.1 Crown and Bridge Market 35

4.5.1.1 CAD/CAM Prosthetics Market ........39

4.5.2 Denture Market..... 41

4.5.3 CAD/CAM System Market 43

4.5.3.1 Full In-Lab CAD/CAM System Market........46

4.5.3.2 Standalone Scanner CAD/CAM System Market ......49

4.5.3.3 Chairside CAD/CAM System Market ..........52

4.6 TREND ANALYSIS BY SEGMENT ......... 55

4.7MARKET DRIVERS AND LIMITERS ...... 57

4.7.1 Total Dental Prosthetics Market... 57

4.7.1.1 Market Drivers.........57

4.7.1.2 Market Limiters .......58

4.7.2 Crown and Bridge Market 60

4.7.2.1 Market Drivers.........60

4.7.2.2 Market Limiters .......61

4.7.3 Denture Market..... 62

4.7.3.1 Market Drivers.........62

4.7.3.2 Market Limiters .......63

4.7.4 CAD/CAM System Market 64

4.7.4.1 Market Drivers.........64

4.7.4.2 Market Limiters .......65

4.8 COMPETITIVE ANALYSIS ........ 67

4.8.1 CAD/CAM Prosthetics Market ..... 67

4.8.1.1 In-Lab CAD/CAM Prosthetics.........67

4.8.1.2 Chairside CAD/CAM Prosthetics Market....68

4.8.2 CAD/CAM System Market 71

4.9 CAD/CAM BLOCK MARKET.. 75

4.9.1 Introduction .......... 75

4.9.2 Market Overview... 76

4.9.3 CAD/CAM Block Market By Unit Type .... 79

4.9.3.1 Zirconia .......79

4.9.3.2 Porcelain .....79

4.9.3.3 Acrylic..........79

4.9.3.4 Metal80

4.10MERGERS AND ACQUISITIONS .......... 83

4.10.1 Market Highlights ........... 85

COUNTRY PROFILES...... 86

5.1 INTRODUCTION ........... 86

5.1.1 Population. 86

5.1.2 Median Age........... 86

5.1.3 GDP per Capita .... 86

5.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants........ 87

5.1.5 Price Index 87

5.2 ASIA-PACIFIC DENTAL PROSTHETICS PER CAPITA SUMMARY........... 88

5.3 JAPAN.. 89

5.4 SOUTH KOREA 90

5.5 AUSTRALIA ..... 91

5.6 DENTISTS PER POPULATION.... 92

JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 93

6.1 INTRODUCTION ........... 93

6.2MARKET ANALYSIS AND FORECAST .. 94

6.2.1 Dental Prosthetic Device Market.. 94

6.2.2 Crown and Bridge Market 98

6.2.2.1 Porcelain-Fused Metal (PFM) Device Market......105

6.2.2.2 Full-Cast Device Market ...107

6.2.2.3 All-Ceramic Device Market...........109

6.2.2.4 Hard-Resin Device Market 111

6.2.3 CAD/CAM Prosthetics Market ... 113

6.2.3.1 Chairside CAD/CAM Prosthetics Market..115

6.2.3.2 In-Lab CAD/CAM Prosthetics Market ......117

6.2.4 Denture Market... 119

6.2.4.1 Full Denture Market ..........123

6.2.4.2 Partial Denture Market .....123

6.2.5 CAD/CAM System Market .......... 125

6.2.5.1 Full In-Lab CAD/CAM System Market......127

6.2.5.2 Standalone Scanner CAD/CAM System Market ....130

6.2.5.3 Chairside CAD/CAM System Market ........133

6.3MARKET DRIVERS AND LIMITERS .... 136

6.3.1 Total Dental Prosthetics Market. 136

6.3.1.1 Market Drivers.......136

6.3.1.2 Market Limiters .....137

6.3.2 Crown and Bridge Market .......... 139

6.3.2.1 Market Drivers.......139

6.3.2.2 Market Limiters .....140

6.3.3 Denture Market... 141

6.3.3.1 Market Drivers.......141

6.3.3.2 Market Limiters .....141

6.3.4 CAD/CAM System Market .......... 142

6.3.4.1 Market Drivers.......142

6.3.4.2 Market Limiters .....143

6.4 COMPETITIVE ANALYSIS ...... 146

6.4.1 CAD/CAM Prosthetics Market ... 146

6.4.1.1 In-Lab CAD/CAM Prosthetics Market ......146

6.4.1.2 Chairside CAD/CAM Prosthetics Market..147

6.4.2 CAD/CAM System Market .......... 149

6.4.2.1 Full In-Lab CAD/CAM System Market......153

6.4.2.2 Standalone Scanner CAD/CAM System Market ....156

6.4.2.3 Chairside CAD/CAM System Market ........159

Sirona.........159

6.5 CAD/CAM BLOCK MARKET 160

6.5.1 Market Overview. 160

6.5.2 : CAD/CAM Block Market by Material Type ..... 163

6.5.2.1 Zirconia .....163

6.5.2.2 Porcelain ...163

6.5.2.3 Acrylic........163

6.5.2.4 Metal..........164

SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET.. 167

7.1 INTRODUCTION ......... 167

7.2MARKET ANALYSIS AND FORECAST 168

7.2.1 Total Dental Prosthetics Market. 168

7.2.2 Crown and Bridge Market .......... 172

7.2.2.1 Porcelain-Fused Metal Market......179

7.2.2.2 Full-Cast Market ...181

7.2.2.3 All-Ceramic Market ...........183

7.2.3 CAD/CAM Prosthetics Market ... 185

7.2.3.1 Chairside CAD/CAM Prosthetics ..187

7.2.3.2 In-Lab CAD/CAM Prosthetics Market ......189

7.2.4 Denture Market... 191

7.2.4.1 Full Denture Market ..........194

7.2.4.2 Partial Denture Market .....194

7.2.5 CAD/CAM System Market .......... 196

7.2.5.1 Full In-Lab CAD/CAM System Market......199

7.2.5.2 Standalone Scanner CAD/CAM System Market ....202

7.2.5.3 Chairside CAD/CAM System Market ........205

7.3MARKET DRIVERS AND LIMITERS .... 208

7.3.1 Total Dental Prosthetic Device Market .. 208

7.3.1.1 Market Drivers.......208

7.3.1.2 Market Limiters .....209

7.3.2 Crown and Bridge Market .......... 211

7.3.2.1 Market Drivers.......211

7.3.2.2 Market Limiters .....212

7.3.3 Denture Market... 213

7.3.3.1 Market Drivers.......213

7.3.3.2 Market Limiters .....214

7.3.4 CAD/CAM System Market .......... 215

7.3.4.1 Market Drivers.......215

7.3.4.2 Market Limiters .....216

7.4 COMPETITIVE ANALYSIS ...... 218

7.4.1 CAD/CAM Prosthetics Market 218

7.4.1.1 In-Lab CAD/CAM Prosthetics Market ......218

7.4.1.2 Chairside CAD/CAM Prosthetics Market..219

7.4.2 Total CAD/CAM System Market .......... 222

7.4.2.1 Full In-Lab CAD/CAM System Market......226

7.4.2.2 Standalone Scanner CAD/CAM System Market ....229

7.4.2.3 Chairside CAD/CAM System Market ........232

7.5 CAD/CAM BLOCK MARKET 233

7.5.1 Introduction ........ 233

7.5.2 CAD/CAM Block Market 234

7.5.3 CAD/CAM Block Market by Material Type........ 237

7.5.3.1 Zirconia .....237

7.5.3.2 Porcelain ...237

7.5.3.3 Acrylic........237

7.5.3.4 Metal..........238

AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET..... 241

8.1 INTRODUCTION ......... 241

8.2MARKET ANALYSIS AND FORECAST 242

8.2.1 Total Dental Prosthetics Market. 242

8.2.2 Crown and Bridge Market .......... 246

8.2.2.1 Porcelain-Fused Metal Market......253

8.2.2.2 Full-Cast Market ...255

8.2.2.3 All-Ceramic Device Market...........257

8.2.3 CAD/CAM Prosthetics Market ... 258

8.2.3.1 Chairside CAD/CAM Prosthetics Market..262

8.2.3.2 In-Lab CAD/CAM Prosthetics Market ......264

8.2.4 Denture Market... 266

8.2.4.1 Full Denture Market ..........269

8.2.4.2 Partial Denture Market .....269

8.2.5 CAD/CAM System Market .......... 271

8.2.5.1 Full In-Lab CAD/CAM System Market......273

8.2.5.2 Standalone Scanner CAD/CAM System Market ....276

8.2.5.3 Chairside CAD/CAM System Market ........279

8.3MARKET DRIVERS AND LIMITERS .... 282

8.3.1 Total Dental Prosthetics Market. 282

8.3.1.1 Market Drivers.......282

8.3.1.2 Market Limiters .....283

8.3.2 Crown and Bridge Market .......... 285

8.3.2.1 Market Drivers.......285

8.3.2.2 Market Limiters .....286

8.3.3 Denture Market... 287

8.3.3.1 Market Drivers.......287

8.3.3.2 Market Limiters .....288

8.3.4 CAD/CAM System Market .......... 288

8.3.4.1 Market Drivers.......288

8.3.4.2 Market Limiters .....290

8.4 COMPETITIVE ANALYSIS ...... 291

8.4.1 CAD/CAM Prosthetics Market ... 291

8.4.1.1 In-Lab CAD/CAM Prosthetics Market ......291

8.4.2 CAD/CAM System Market .......... 294

8.4.2.1 Full In-Lab System Market 299

8.4.2.2 Standalone Scanner CAD/CAM System Market ....302

8.4.2.3 Chairside CAD/CAM System Market ........305

8.5 CAD/CAM BLOCK MARKET 308

8.5.1 Market Overview. 308

8.5.2 CAD/CAM Block Market by Material Type........ 311

8.5.2.1 Zirconia .....311

8.5.2.2 Porcelain ...311

8.5.2.3 Acrylic........311

8.5.2.4 Metal..........312

ABBREVIATIONS 315

LIST OF FIGURES

EXECUTIVE SUMMARY 1

RESEARCH METHODOLOGY.... 9

INTRODUCTION TO DENTAL PROSTHETICS 20

ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET.. 27

Figure 4-1: Exchanges Rates for the U.S. Dollar, 2010.... 28

Figure 4-2: Total Dental Prosthetic and CAD/CAM Device Market, Asia-Pacific,

2007 – 2017 (US$M) . 30

Figure 4-3: Total Dental Prosthetic Market, Asia-Pacific, 2007 – 2017 (US$M) .. 34

Figure 4-4: Crown and Bridge Units Sold by Material Type, Asia-Pacific,

2007 – 2017... 36

Figure 4-5: Crown and Bridge Market, Asia-Pacific, 2007 – 2017 (US$) . 38

Figure 4-6: CAD/CAM Prosthetics Market, Asia-Pacific, 2007 – 2017 (US$) ...... 40

Figure 4-7: Denture Units Sold by Type, Asia-Pacific, 2007 – 2017 ........ 41

Figure 4-8: Denture Market, Asia-Pacific, 2007 – 2017 (US$)..... 42

Figure 4-9: CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)......... 44

Figure 4-10: Full In-Lab CAD/CAM System Market, Asia-Pacific, 2007 – 2017

(US$) 47

Figure 4-11: Standalone Scanner CAD/CAM System Market, Asia-Pacific,

2007 – 2017 (US$)..... 50

Figure 4-12: Chairside CAD/CAM System Market, Asia-Pacific, 2007 – 2017

(US$) 53

Figure 4-13: Growth Rates by Segment, Total Dental Prosthetic and CAD/CAM

Device Market, Asia-Pacific, 2007 – 2017...... 56

Figure 4-14: Drivers and Limiters, Total Dental Prosthetics Market,

Asia-Pacific, 2010 ..... 60

Figure 4-15: Drivers and Limiters, Crown and Bridge Market, Asia-Pacific, 2010 62

Figure 4-16: Drivers and Limiters, Denture Market, Asia-Pacific, 2010... 63

Figure 4-17: Drivers and Limiters, CAD/CAM System Market, Asia-Pacific,

2010 .. 66

Figure 4-18: Leading Competitors, Total CAD/CAM Prosthetics Market,

Asia-Pacific, 2010 ..... 69

Figure 4-19: Leading Competitors, Total CAD/CAM System Market,

Asia-Pacific, 2010 ..... 73

Figure 4-20: CAD/CAM Block Market, Asia-Pacific, 2007 – 2017 (US$) 77

Figure 4-21: Units Sold by Material Type, CAD/CAM Block Market,

Asia-Pacific, 2007 – 2017 ...... 81

COUNTRY PROFILES .. 86

Figure 5-1: Price Index, Asia-Pacific, 2010 ........ 87

Figure 5-2: Country Indicators, Asia-Pacific, 2010 ......... 88

Figure 5-3: Population per Dentist, Asia-Pacfic, 2010 ..... 92

JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET........ 93

Figure 6-1: Total Dental Prosthetic Device Market, Japan, 2007 – 2017 (US$M) . 95

Figure 6-2: Total Dental Prosthetic Device Market, Japan, 2007 – 2017 (JP¥M) .. 96

Figure 6-3: Crown and Bridge Market, Japan, 2007 – 2017 (US$) ........... 99

Figure 6-4: Crown and Bridge Market, Japan, 2007 – 2017 (JP¥) 99

Figure 6-5: Crown and Bridge Units Sold by Material Type, Japan,

2007 – 2017. 101

Figure 6-6: PFM Device Market, Japan, 2007 – 2017 (US$) ...... 106

Figure 6-7: PFM Device Market, Japan, 2007 – 2017 (JP¥) ....... 106

Figure 6-8: Full-Cast Device Market, Japan, 2007 – 2017 (US$) ........... 108

Figure 6-9: Full-Cast Device Market, Japan, 2007 – 2017 (JP¥) 108

Figure 6-10: All-Ceramic Device Market, Japan, 2007 – 2017 (US$) ..... 110

Figure 6-11: All-Ceramic Device Market, Japan, 2007 – 2017 (JP¥) ...... 110

Figure 6-12: Hard-Resin Device Market, Japan, 2007 – 2017 (US$) ...... 111

Figure 6-13: Hard-Resin Device Market, Japan, 2007 – 2017 (JP¥) ....... 112

Figure 6-14: CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (US$) 114

Figure 6-15: CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (JP¥).. 114

Figure 6-16: Chairside CAD/CAM Prosthetics Market, Japan, 2007 – 2017

(US$) .......... 116

Figure 6-17: Chairside CAD/CAM Prosthetics Market, Japan, 2007 – 2017

(JP¥) ........... 116

Figure 6-18: In-Lab CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (US$) . 118

Figure 6-19: In-Lab CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (JP¥) .. 118

List of Figures

© iData Research Inc., 2011 www.idataresearch.net xi

Figure 6-20: Denture Market by Type, Japan, 2007 – 2017........ 120

Figure 6-21: Denture Market, Japan, 2007 – 2017 (US$) ........... 121

Figure 6-22: Denture Market, Japan, 2007 – 2017 (JP¥) 121

Figure 6-23: Denture Units by Type, Japan, 2007 – 2017 .......... 124

Figure 6-24: CAD/CAM System Market, Japan, 2007 – 2017 .... 125

Figure 6-25: Full In-Lab CAD/CAM System Market, Japan, 2007 – 2017 (US$) 128

Figure 6-26: Full In-Lab CAD/CAM System Market, Japan, 2007 – 2017 (JP¥) . 128

Figure 6-27: Standalone Scanner CAD/CAM System Market, Japan, 2007 – 2017

(US$) .......... 131

Figure 6-28: Standalone Scanner CAD/CAM System Market, Japan, 2007 – 2017

(JP¥) ........... 131

Figure 6-29: Chairside CAD/CAM System Market, Japan, 2007 – 2017 (US$) ... 134

Figure 6-30: Chairside CAD/CAM System Market, Japan, 2007 – 2017 (JP¥) .... 134

Figure 6-31: Drivers and Limiters, Total Dental Prosthetics Market, Japan,

2010 138

Figure 6-32: Drivers and Limiters, Crown and Bridge Market, Japan, 2010 ....... 140

Figure 6-33: Drivers and Limiters, Denture Market, Japan, 2010 ........... 142

Figure 6-34: Drivers and Limiters, CAD/CAM System Market, Japan, 2010 ...... 145

Figure 6-35: Leading Competitors, CAD/CAM Prosthetics Market, Japan, 2010 147

Figure 6-36: Leading Competitors, CAD/CAM System Market, Japan, 2010...... 151

Figure 6-37: Leading Competitors, Full In-Lab CAD/CAM System Market, Japan,

2010 154

Figure 6-38: Leading Competitors, Standalone Scanner CAD/CAM System

Market, Japan, 2010. 157

Figure 6-39: CAD/CAM Block Market, Japan, 2007 – 2017 (US$) ........ 161

Figure 6-40: CAD/CAM Block Market, Japan, 2007 – 2017 (JP¥) ......... 161

Figure 6-41: Units Sold by Material Type, CAD/CAM Block Market, Japan,

2007 – 2017. 165

SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET .... 167

Figure 7-1: Dental Prosthetics Market, South Korea, 2007 – 2017 (US$M)........ 169

Figure 7-2: Dental Prosthetics Market, South Korea, 2007 – 2017 (KR?M) ...... 170

Figure 7-3: Crown and Bridge Market, South Korea, 2007 – 2017 (US$) ........... 173

Figure 7-4: Crown and Bridge market, South Korea, 2007 – 2017 (KR?) ......... 173

Figure 7-5: Crown and Bridge Units Sold by Material Type, South Korea,

2007 – 2017. 175

Figure 7-6: PFM Device Market, South Korea, 2007 – 2017 (US$) ........ 180

Figure 7-7: PFM Device Market, South Korea, 2007 – 2017 (KR?) ...... 180

Figure 7-8: Full-Cast Device Market, South Korea, 2007 – 2017 (US$) . 182

Figure 7-9: Full-Cast Device Market, South Korea, 2007 – 2017 (KR?) ........... 182

Figure 7-10: All-Ceramic Device Market, South Korea, 2007 – 2017 (US$)....... 184

Figure 7-11: All-Ceramic Device Market, South Korea, 2007 – 2017 (KR?) ..... 184

Figure 7-12: CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (US$) .. 186

Figure 7-13: CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (KR?) 186

Figure 7-14: Chairside CAD/CAM Prosthetics Market, South Korea, 2007 – 2017

(US$) .......... 188

Figure 7-15: Chairside CAD/CAM Prosthetics Market, South Korea, 2007 – 2017

(KR?) ........ 188

Figure 7-16: In-Lab CAD/CAM Prosthetics Market, South Korea, 2007 – 2017

(US$) .......... 190

Figure 7-17: In-Lab CAD/CAM Prosthetics Market, South Korea, 2007 – 2017

(KR?) ........ 190

Figure 7-18: Denture Market, South Korea, 2007 – 2017 (US$). 192

Figure 7-19: Denture Market, South Korea, 2007 – 2017 (KR?) ........... 192

Figure 7-20: Denture Units by Type, South Korea, 2007 – 2017 195

Figure 7-21: CAD/CAM System Market, South Korea, 2007 – 2017 ...... 197

Figure 7-22: Full In-Lab CAD/CAM System Market, South Korea, 2007 – 2017

(US$) .......... 200

Figure 7-23: Full In-Lab CAD/CAM System Market, South Korea, 2007 – 2017

(KR?) ........ 200

Figure 7-24: Standalone Scanner CAD/CAM System Market, South Korea,

2007 – 2017 (US$)... 203

Figure 7-25: Standalone Scanner CAD/CAM System Market, South Korea,

2007 – 2017 (KR?) . 203

Figure 7-26: Chairside CAD/CAM System Market, South Korea, 2007 – 2017

(US$) .......... 206

Figure 7-27: Chairside CAD/CAM System Market, South Korea, 2007 – 2017

(KR?) ........ 206

Figure 7-28: Drivers and Limiters, Dental Prosthetics Market, South Korea,

2010 210

Figure 7-29: Drivers and Limiters, Crown and Bridge Market, South Korea,

2010 212

Figure 7-30: Drivers and Limiters, Denture Market, South Korea, 2010. 214

Figure 7-31: Drivers and Limiters, CAD/CAM System Market, South Korea,

2010 217

Figure 7-32: Leading Competitors, CAD/CAM Prosthetics Market, South Korea,

2010 220

Figure 7-33: Leading Competitors, CAD/CAM System Market, South Korea,

2010 224

Figure 7-34: Leading Competitors, Full In-Lab CAD/CAM System Market,

South Korea, 2010 ... 227

Figure 7-35: Leading Competitors, Standalone Scanner CAD/CAM System

Market, South Korea, 2010 .. 230

Figure 7-36: CAD/CAM Block Market, South Korea, 2007 – 2017 (US$) .......... 235

Figure 7-37: CAD/CAM Block Market, South Korea, 2007 – 2017 (KR?) ........ 235

Figure 7-38: Units Sold by Material Type, CAD/CAM Block Market,

South Korea, 2007 – 2017.... 239

AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 241

Figure 8-1: Total Dental Prosthetics Market, Australia, 2007 – 2017 (US$M).... 243

Figure 8-2: Total Dental Prosthetics Market, Australia, 2007 – 2017 (AU$M) ... 244

Figure 8-3: Crown and Bridge Market, Australia, 2007 – 2017 (US$) .... 247

Figure 8-4: Crown and Bridge Market, Australia, 2007 – 2017 (AU$) ... 247

Figure 8-5: Crown and Bridge Units Sold by Material Type, Australia,

2007 – 2017. 249

Figure 8-6: Porcelain-Fused Metal Device Market, Australia, 2007 – 2017

(US$) .......... 254

Figure 8-7: Porcelain-Fused Metal Device Market, Australia, 2007 – 2017

(AU$).......... 254

Figure 8-8: Full-Cast Device Market, Australia, 2007 – 2017 (US$) ...... 255

Figure 8-9: Full-Cast Device Market, Australia, 2007 – 2017 (AU$) ..... 256

Figure 8-10: All-Ceramic Device Market, Australia, 2007 – 2017 (US$) ........... 257

Figure 8-11: All-Ceramic Device Market, Australia, 2007 – 2017 (AU$) ........... 258

Figure 8-12: CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (US$) ....... 259

Figure 8-13: CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (AU$)....... 260

Figure 8-14: Chairside CAD/CAM Prosthetics Market, Australia, 2007 – 2017

(US$) .......... 263

Figure 8-15: Chairside CAD/CAM Prosthetics Market, Australia, 2007 – 2017

(AU$).......... 263

Figure 8-16: In-Lab CAD/CAM Prosthetics Market, Australia, 2007 – 2017

(US$) .......... 265

Figure 8-17: In-Lab CAD/CAM Prosthetics Market, Australia, 2007 – 2017

(AU$).......... 265

Figure 8-18: Denture Market, Australia, 2007 – 2017 (US$)...... 267

Figure 8-19: Denture Market, Australia, 2007 – 2017 (AU$) ..... 267

Figure 8-20: Units Sold by Type, Denture Market, Australia, 2007– 2017 ......... 270

Figure 8-21: CAD/CAM System Market, Australia, 2007 – 2017 ........... 271

Figure 8-22: Full In-Lab CAD/CAM System Market, Australia, 2007 – 2017

(US$) .......... 274

Figure 8-23: Full In-Lab CAD/CAM System Market, Australia, 2007 – 2017

(AU$).......... 274

Figure 8-24: Standalone Scanner CAD/CAM System Market, Australia,

2007 – 2017 (US$)... 277

Figure 8-25: Standalone Scanner CAD/CAM System Market, Australia,

2007 – 2017 (AU$) .. 277

Figure 8-26: Chairside CAD/CAM System Market, Australia, 2007 – 2017

(US$) .......... 280

Figure 8-27: Chairside CAD/CAM System Market, Australia, 2007 – 2017

(AU$).......... 280

Figure 8-28: Drivers and Limiters, Dental Prosthetics Market, Australia, 2010 .. 284

Figure 8-29: Drivers and Limiters, Crown and Bridge Market, Australia, 2010 .. 287

Figure 8-30: Drivers and Limiters, Denture Market, Australia, 2010...... 288

Figure 8-31: Drivers and Limiters, CAD/CAM System Market, Australia, 2010 . 290

List of Figures

© iData Research Inc., 2011 www.idataresearch.net xv

Figure 8-32: Leading Competitiors, CAD/CAM Prosthetics Market, Australia,

2010 292

Figure 8-33: Leading Competitors, CAD/CAM System Market, Australia, 2010 297

Figure 8-34: Leading Competitors, Full In-Lab CAD/CAM System Market,

Australia, 2010 ........ 300

Figure 8-35: Leading Competitors, Standalone Scanner System Market, Australia,

2010 303

Figure 8-36: Leading Competitors, Chairside CAD/CAM System Market,

Australia, 2010 ........ 306

Figure 8-37: CAD/CAM Block Market, Australia, 2007 – 2017 (US$) ... 309

Figure 8-38: CAD/CAM Block Market, Australia, 2007 – 2017 (AU$) .. 309

Figure 8-39: Units Sold by Material Type, CAD/CAM Block Market, Australia,

2007 – 2017. 313

ABBREVIATIONS ...... 315

LIST OF CHART S

EXECUTIVE SUMMARY 1

Chart 1-1: Dental Prosthetics and CAD/CAM Device Market, Asia-Pacific,

2007 – 2017 (US$M) ... 1

Chart 1-2: Percentage of Prosthetics Sold by CAD/CAM Technology versus

Conventional Methods, Asia-Pacific, 2007 – 2017 ........ 2

Chart 1-3: CAD/CAM Block Unit Share by Material Type, Asia-Pacific, 2010 ...... 3

Chart 1-4: Dental Prosthetics Market by Country, Asia-Pacific, 2010 ........ 4

Chart 1-5: Growth Rates by Segment, Crown and Bridge Market, Asia-Pacific,

2007 – 2017..... 5

Chart 1-6: Denture Market, Asia-Pacific, 2007 – 2017 (US$M) ..... 6

Chart 1-7: CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M) 7

Chart 1-8: Leading Competitors, CAD/CAM System Market, Asia-Pacific, 2010 ... 8

RESEARCH METHODOLOGY.... 9

INTRODUCTION TO DENTAL PROSTHETICS 20

ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET.. 27

Chart 4-1: Total Dental Prosthetic Market, Asia-Pacific, 2007 – 2017 (US$M) .... 31

Chart 4-2: Total CAD/CAM System Market, Asia-Pacific, 2010 – 2017 (US$M) . 32

Chart 4-3: Crown and Bridge Units by Material Type, Asia-Pacific, 2007 – 2017 37

Chart 4-4: CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M) .......... 45

Chart 4-5: Full In-Lab CAD/CAM System Market, Asia-Pacific, 2007 – 2017

(US$M) ......... 48

Chart 4-6: Standalone Scanner CAD/CAM System Market, Asia-Pacific,

2007 – 2017 (US$M) . 51

Chart 4-7: Chairside CAD/CAM System Market, Asia-Pacific, 2007 – 2017

(US$M) ......... 54

Chart 4-8: Leading Competitors, Total CAD/CAM Prosthetics Market,

Asia-Pacific, 2010 ..... 70

Chart 4-9: Leading Competitors, Total CAD/CAM System Market, Asia-Pacific,

2010 .. 74

Chart 4-10: CAD/CAM Block Market, Asia-Pacific, 2007 – 2017 (US$M) .......... 78

Chart 4-11: Units Sold by Material Type, CAD/CAM Block Market,

Asia-Pacific, 2007 – 2017 ...... 82

COUNTRY PROFILES .. 86

Chart 5-1: Country Statistics, Japan, 2010 .......... 89

Chart 5-2: Country Statistics, South Korea, 2010 90

Chart 5-3: Country Statistics, Australia, 2010 .... 91

JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET........ 93

Chart 6-1: Total Dental Prosthetic Device Market, Japan, 2007 – 2017 (US$M)... 97

Chart 6-2: Crown and Bridge Market, Japan, 2007 – 2017 (US$M)........ 100

Chart 6-3: Crown and Bridge Units Sold by Material Type, Japan, 2010 102

Chart 6-4: Crown and Bridge Units Sold by Material Type, Japan, 2017 ........... 103

Chart 6-5: Crown and Bridge Unit Share by Material Type, Japan, 2007 – 2017 104

Chart 6-6: Denture Market, Japan, 2007 – 2017 (US$M) ........... 122

Chart 6-7: CAD/CAM System Market, Japan, 2007 – 2017 (US$M) ...... 126

Chart 6-8: Full In-Lab CAD/CAM System Market, Japan, 2007 – 2017 (US$M) 129

Chart 6-9: Standalone Scanner CAD/CAM System Market, Japan, 2007 – 2017

(US$M) ....... 132

Chart 6-10: Chairside CAD/CAM System Market, Japan, 2007 – 2017 (US$M) . 135

Chart 6-11: Leading Competitors, CAD/CAM Prosthetics Market, Japan, 2010.. 148

Chart 6-12: Leading Competitors, CAD/CAM System Market, Japan, 2010 ...... 152

Chart 6-13: Leading Competitors, Full In-Lab CAD/CAM System Market, Japan,

2010 155

Chart 6-14: Leading Competitors, Standalone Scanner CAD/CAM System

Market, Japan, 2010. 158

Chart 6-15: CAD/CAM Block Market, Japan, 2007 – 2017 (US$M) ...... 162

Chart 6-16: Units Sold by Material Type, CAD/CAM Block Market, Japan,

2007 – 2017. 166

SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE

MARKET .... 167

Chart 7-1: Dental Prosthetics Market, South Korea, 2007– 2017 (US$M) .......... 171

Chart 7-2: Crown and Bridge Market, South Korea, 2007 – 2017 (US$M) ......... 174

Chart 7-3: Crown and Bridge Market by Material Type, South Korea, 2010 ...... 176

Chart 7-4: Crown and Bridge Market by Material Type, South Korea, 2017 ...... 177

Chart 7-5: Crown and Bridge Unit Share by Material Type, South Korea,

2007 – 2017. 178

Chart 7-6: Denture Market, South Korea, 2007 – 2017 (US$M) . 193

Chart 7-7: CAD/CAM System Market, South Korea, 2007 – 2017 (US$M) ....... 198

Chart 7-8: Full In-Lab CAD/CAM System Market, South Korea, 2007 – 2017

(US$M) ....... 201

Chart 7-9: Standalone Scanner CAD/CAM System Market, South Korea,

2007 – 2017 (US$M) ........... 204

Chart 7-10: Chairside CAD/CAM System Market, South Korea, 2007 – 2017

(US$M) ....... 207

Chart 7-11: Leading Competitors, CAD/CAM Prosthetics Market, South Korea,

2010 221

Chart 7-12: Leading Competitors, CAD/CAM System Market, South Korea,

2010 225

Chart 7-13: Leading Competitors, Full In-Lab CAD/CAM System Market, South

Korea, 2010 . 228

Chart 7-14: Leading Competitors, Standalone Scanner CAD/CAM System

Market, South Korea, 2010 .. 231

Chart 7-15: CAD/CAM Block Market, South Korea, 2007 – 2017 (US$M) ...... 236

Chart 7-16: Units Sold by Material Type, CAD/CAM Block Market, South

Korea, 2007 – 2017.. 240

AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 241

Chart 8-1: Dental Prosthetics Market, Australia, 2007 – 2017 (US$M) .. 245

Chart 8-2: Crown and Bridge Market, Australia, 2007 – 2017 (US$M) .. 248

Chart 8-3: Crown and Bridge Units Sold by Material Type, Australia, 2010 ..... 250

Chart 8-4: Crowns and Bridge Units Sold by Material Type, Australia, 2017 ..... 251

Chart 8-5: Crown and Bridge Unit Share by Material Type, Australia,

2007 – 2017. 252

Chart 8-6: CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (US$M) ....... 261

Chart 8-7: Denture Market Australia, 2007 – 2017 (US$M)....... 268

Chart 8-8: CAD/CAM System Market, Australia, 2007 – 2017 (US$M) . 272

Chart 8-9: Full In-Lab CAD/CAM System Market, Australia, 2007 – 2017

(US$M) ....... 275

Chart 8-10: Standalone Scanner CAD/CAM System Market, Australia,

2007 – 2017 (US$M) ........... 278

Chart 8-11: Chairside CAD/CAM System Market, Australia, 2007 – 2017

(US$M) ....... 281

Chart 8-12: Leading Competitors, CAD/CAM Prosthetics, Australia, 2010 ........ 293

Chart 8-13: Leading Competitors, CAD/CAM System Market, Australia, 2010 .. 298

Chart 8-14: Leading Competitors, Full In-Lab CAD/CAM System Market,

Australia, 2010 ........ 301

Chart 8-15: Leading Competitors, Standalone Scanner System Market, Australia,

2010 304

Chart 8-16: Leading Competitors, Chairside CAD/CAM System Market,

Australia, 2010 ........ 307

Chart 8-17: CAD/CAM Block Market, Australia, 2007 – 2017 (US$M) . 310

Chart 8-18: Units by Material Type, CAD/CAM Block Market, Australia,

2007 – 2017. 314

ABBREVIATIONS ...... 315

To order this report:

Dental Equipment Industry: Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011

Dental Equipment Business News

More   Market Research Report

Check our   Company Profile, SWOT and Revenue Analysis!

Nicolas Bombourg
Reportlinker
Email: Email Contact
US: (805)652-2626
Intl: +1 805-652-2626

SOURCE Reportlinker

Contact:
Reportlinker
Web: http://www.reportlinker.com