Kirloskar Brothers Utilize PTC's Pro/Engineer(R) to Design Pump Engineering Solution for Turnkey Indian Irrigation Project
[ Back ]   [ More News ]   [ Home ]
Kirloskar Brothers Utilize PTC's Pro/Engineer(R) to Design Pump Engineering Solution for Turnkey Indian Irrigation Project

NEEDHAM, Mass.—(BUSINESS WIRE)—August 11, 2008— PTC (Nasdaq: PMTC), the Product Development Company®, today announced that Kirloskar Brothers Ltd (KBL) a leading manufacturer and exporter of centrifugal pumps and valves has leveraged Pro/ENGINEER® to design a pump engineering solution based on its unique siphon design for the Saurashtra Branch canal, part of the strategic Narmada Dam project in the Western Indian state of Gujurat. State of the art technology coupled with design innovation helped overcome significant terrain, engineering and financial challenges, resulting in a successful completion of the project and provision of irrigation and drinking water to a large population of rural farmers in the state. In recognition, Kirloskar Brothers was recognized with a Technology Innovation award by the Government of Gujurat as well as a US Patent.

The primary challenge was to negotiate the difficult topography in the largest branch canal of the Narmada Project canal system and ensure a continuous and smooth flow of water for irrigation requirements in over 4,000 drought affected towns and villages in the ascending Saurashtra region. To overcome this challenge, KBL designed the worlds largest pumping scheme which included three power stations and five pumping stations. Faced by the additional challenge of a vacuum created in the curvature of the pipeline which reduced the flow of water, Pro/ENGINEER was used to conduct a volume analysis, design and develop a prototype of the siphon and accurately determine the exact placement of the siphon on the pump.

The successful completion of this project resulted in enriching the lives of thousands of people living in over 4,000 drought affected villages in the Saurashtra and Kutch region by providing drinking water, hydroelectric power and irrigation across 5.4 lakh hectares of land. The innovative siphon design enabled a significant saving of power, cost and also increased the operational efficiency of the plant. The energy savings resulting from using the innovative concept is expected to save energy units of 8.6 MW that corresponds to approximately $5 Million USD per year. The project was conceptualized, designed, executed and commissioned under the leadership of Shri Ramesh K. Srivastava, director, Kirlsokar Brothers Ltd.

The Narmada Project saw KBL faced with a never before seen technological challenge. With a combination of research, innovation and team work, combined with the best of breed CAD technology of PTCs Pro/ENGINEER, KBLs Engineering division was able to successfully overcome this challenge, said Dr. J T Kshirsagar, vice president, corporate research & engineering division, Kirloskar Brothers Limited. The most significant result of this project has been the enrichment of the lives of thousands of people living in over 4,000 drought affected villages in the area, while also lowering operating costs of the system.

We are pleased to be a part of this social initiative with Kirloskar Brothers Ltd. With the successful completion of the Saurashtra Branch Canal project, PTC has reiterated its commitment to providing best in class solutions that not only address the business needs of our customers, but also enable them to overcome unique technological and innovation challenges, said Mr. Rafiq Somani, country manager, PTC India. We are particularly proud to be associated with a project that has such a major impact on the lives and livelihood of thousands of farmers.

KBL has been a pioneer in conducting research in order to provide fluid handling solutions, achieve technological break through using advanced computational and experimental techniques and develop reliable and state of the art products. The company has engineered large vertical energy efficient pumps and concrete volume pumps for power projects, water supply and irrigation schemes and Hydel Turbines for small Hydel power projects. It also holds the distinction of being the only pump manufacturing company in India to have manufactured canned motor pumps for hazardous chemicals in nuclear plants.

About Sardar Sarovar Project:

The Narmada Dam Project is a project involving the construction of a series of large hydroelectric dams on the Narmada River (Narbada River) in India. Sardar Sarovar Project (SSP) is the largest multipurpose project involved in the construction. The project took form in 1979 as part of a development scheme to increase irrigation and produce hydroelectricity. Of the 30 large dams planned on the river Narmada, Sardar Sarovar is the largest. The multipurpose project will irrigate more than 18,000 square kilometers-most of it in drought prone areas of Kutch and Saurashtra in Gujurat, India

About KBL

Incorporated in the year 1920 Kirloskar Brothers Limited, (KBL) is the acknowledged leader in fluid handling and largest manufacturer and exporter of pumps in India. The companys product range includes a wide range of energy efficient centrifugal pumps for agriculture, domestic, industrial, process and general applications and large vertical pumps and concrete volute pumps for power projects, water supply and lift irrigation schemes, ranging from small domestic pumps of 0.1kW to large pumps of 12000 kW. For more information please visit: http://web.kbl.co.in/.

About PTC

PTC (Nasdaq: PMTC) provides leading product lifecycle management (PLM), content management and dynamic publishing solutions to more than 50,000 organizations worldwide. PTC customers include the world's most innovative companies in manufacturing, publishing, services, government and life sciences industries. PTC is included in the S&P Midcap 400 and Russell 2000 indices. For more information on PTC, please visit http://www.ptc.com.

Except for the historical information contained herein, matters discussed in this news release may constitute forward-looking statements that involve risks and uncertainties that could cause actual results to differ materially from those projected. Such risks include the ability of PTC to develop the technologies necessary to deliver products and services that allow customers to implement a comprehensive product development system across an extended enterprise; PTC's ability to co-develop and integrate technologies that adequately address Airbuss requirements; PTCs successful coordination and management of joint activities with Airbus and other third parties (including development, technology integration, implementation and support) in order to deliver products and services that meet those requirements; and the success of PTCs customer satisfaction initiatives in providing the foundation for long-term relationships and repeat business, as well as those that are detailed from time to time in reports filed by PTC with the U.S. Securities and Exchange Commission, including PTCs most recent reports on Form 10-K and 10-Q. The announcement of any particular development agreement and/or selection or implementation of PTC products is not necessarily indicative of the timing of recognition of revenue therefrom or the level of revenue for any particular period.

PTC, the PTC logo, The Product Development Company, Pro/ENGINEER, Windchill, Windchill ProjectLink and Windchill PDMLink, Arbortext, Mathcad and all PTC product names are trademarks or registered trademarks of Parametric Technology Corporation in the United States and in other countries.



Contact:

PTC
Nicole Rowe, 781-370-6369
Corporate Communications
Email Contact
or
WeberShandwick
Amanda Keane, 617-520-7260
Email Contact