Nano Dimension’s Revenue Increased by 107% in 9 Months and by 206% in 3 Months Ended 09/30/2021, Compared to 09/30/2020; 65% Increase Over Q2/2021
[ Back ]   [ More News ]   [ Home ]
Nano Dimension’s Revenue Increased by 107% in 9 Months and by 206% in 3 Months Ended 09/30/2021, Compared to 09/30/2020; 65% Increase Over Q2/2021

SUNRISE, Fla., Nov. 24, 2021 (GLOBE NEWSWIRE) -- Nano Dimension Ltd. (“Nano Dimension” or the “Company”) (Nasdaq: NNDM), an industry-leader in Additively Manufactured Electronics (AME), Printed Electronics (PE), and Micro Additive Manufacturing (Micro-AM), today announced financial results for the third quarter ended September 30, 2021. 

Nano Dimension reported revenues of $1,340,000 and $2,962,000 for the third quarter and nine-month periods ended September 30, 2021, respectively, compared to revenues of $438,000 and $1,428,000 for the third quarter and nine-month periods ended September 30, 2020, respectively. The Company ended the quarter with a cash and deposits balance of $1,385,391,000 (including short-term unrestricted bank deposits). Total operating loss for the third quarter was $24,507,000 (including approximately $12,521,000 of non-cash share-based compensation plus depreciation and amortization expenses).

CEO MESSAGE TO SHAREHOLDERS:

Mr. Yoav Stern, Chairman and Chief Executive Officer of Nano Dimension, commented:

“Our revenue for the nine months ended September 30, 2021, was up by more than 107% compared to the same period in 2020, with an increase of 65% in quarter-over-quarter (compared to the second quarter of 2021). While this is a substantial early indication of the build-up of our sales and marketing network, as I’ve mentioned before, these results are not necessarily a comprehensive attestation of the status of the company. Our business is positively affected by sporadic yet repetitive adjustments of the relevant industrial communities toward a ‘living with Covid-19 mentality.’ Encouraging as they are, our revenue numbers are still too small in absolute magnitude to derive any meaningful conclusions.

"More important is the introduction of our new DragonFly IV system, combined with the efficiency-enhancing FLIGHT Software package. Both were introduced last week at the strategically important Productronica trade show in Munich, Germany, which resumed after a two-year hiatus resulting from the Covid-19 shutdowns.

"DragonFly IV is a unique and innovative, first-to-market Dielectric & Conductive-Materials Additive Manufacturing System for the fabrication of High-Performance Electronic Devices (Hi-PEDs®) by depositing layers of proprietary materials simultaneously, while concurrently integrating in-situ capacitors, antennas, coils, transformers, and electro-mechanical components. DragonFly IV delivers improved accuracy of traces, spacing, and vias, improved high end printed circuit board (PCB) quality and the ability to design and produce 3D Hi-PEDs® in a one-step production process. New capabilities include integration with Nano Dimension’s new FLIGHT software, integration of 3D elements in PCB, 3D designed Hi-PEDs®, support of HDI level elements, 75µm traces; 100µm spacing; 150µm via, enhanced print quality, yield optimization with predictable conductivity and low thickness variation <5%.

"No less important is our announcement from early November regarding the acquisition of Essemtec AG from Lucerne, Switzerland. Essemtec’s product portfolio is comprised of production equipment for placing and assembling electronic components on printed circuit boards. The products are leaders in adaptive highly flexible surface mount technology (SMT) pick-and-place equipment, sophisticated dispenser suitable for both high-speed and micro-dispensing, and intelligent production material storage and logistic system. The systems are equipped with a software package which makes extensive and efficient material management possible. Essemtec’s products portfolio will continue to be available to the thousands of organizations that have called themselves a customer of Essemtec, while also being integrated with additive 3D-printing technologies, becoming part of the AME revolution that Nano Dimension is driving with its existing product line.”

“In summary,” added Mr. Stern, “Within the foreseeable future, our three business development pillars:

are planned to converge and are designed to fuel a mutually accelerated scalable growth. The companies we have acquired as well as future potential M&A targets are analyzed based on their ability to drive R&D efforts in ways not otherwise possible. Additionally, they are chosen based on their expected amalgamation with the marketing channels of the products we develop, contributing to the market presence we need in order to maximize our success. In parallel, we have planned and are currently executing and hoping to surpass any present solutions for 'robotic brains' in manufacturing, material technologies and 3D-printing performance. Those, in turn, are aimed to create a business-disruptive set of inflection points. While, as usual, there is no guaranty for the timing thereof, these milestones will hopefully cause an increase of value by step functions and create an exceptional time-weighted return on investment for all our long-term investors,” Mr. Stern concluded.

Third Quarter 2021 Financial Results

Nine Months Ended September 30, 2021 Financial Results

Balance Sheet Highlights

Conference call information

The Company will host a conference call to discuss these financial results today, November 24, 2021, at 9:00 a.m. EST (4:00 p.m. IST). U.S. Dial-in Number: 1-866-744-5399, Israel Dial-in Number: 972-3-9180692. Webcast link:  https://Veidan.activetrail.biz/nanodimensionq3-2021. Please request the “Nano Dimension NNDM call” when prompted by the conference call operator. For those unable to participate in the conference call, there will be a replay available from a link on Nano Dimension’s website at investors.nano-di.com/events-and- presentations.

About Nano Dimension

Nano Dimension’s (Nasdaq: NNDM) vision is to transform the electronics and similar additive manufacturing sectors through the development and delivery of environmentally friendly and economically efficient additive manufacturing, Industry 4.0 solution, while enabling a one-production-step-conversion of digital designs into functioning devices - on-demand, anytime, anywhere.

Nano Dimension plans to execute on this vision by building an eco-friendly and intelligent distributed network of additively manufacturing self-learning & self-improving systems, which are designed to deliver a superior ROI to their owners as well as to Nano Dimension shareholders and stakeholders.

The DragonFly IV® system serves cross-industry High-Performance Electronic Devices (Hi-PEDs®) fabrication needs, by depositing proprietary conductive and dielectric materials simultaneously, while concurrently integrating in-situ capacitors, antennas, coils, transformers, and electromechanical components. The outcomes are Hi-PEDs® which are integral enablers of autonomous intelligent drones, cars, satellites, smartphones, and in vivo medical devices. These products enable iterative development, IP safety, fast time-to-market, and device performance gains. With DragonFly IV®, a revolution happens at the click of a button, allowing customers to go from CAD to a functional device in a matter of hours instead of weeks; creating products with better performance; reducing the size and weight of electronic parts and devices; enabling innovation; and, critically important, protecting IP, all the while limiting environmental pollution and chemical waste.

Nano Dimension’s Fabrica 2.0 micro additive manufacturing system enables the production of microparts based on a Digital Light Processor (DLP) engine that achieves repeatable micron levels resolution. The Fabrica 2.0 is engineered with a patented array of sensors that allows a closed feedback loop, using proprietary materials to achieve very high accuracy while remaining a cost-effective mass manufacturing solution. It is used in the areas of micron-level resolution of medical devices, micro-optics, semi-conductors, micro-electronics, micro-electro-mechanical systems (MEMS), microfluidics, and life sciences instruments.

For more information, please visit www.nano-di.com.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995 and other Federal securities laws. Words such as “expects,” “anticipates,” “intends,” “plans,” “believes,” “seeks,” “estimates” and similar expressions or variations of such words are intended to identify forward-looking statements. Because such statements deal with future events and are based on Nano Dimension’s current expectations, they are subject to various risks and uncertainties, and actual results, performance or achievements of Nano Dimension could differ materially from those described in or implied by the statements in this press release. For example, Nano Dimension is using forward-looking statements when it discusses the benefits and advantages of DragonFly IV system, that Essemtec’s portfolio of products will continue to be available to their customers, while also being part of the AME revolution that the Company is driving with its existing technology, the potential for completion of and benefits from any additional M&A transactions, future performance of our solutions, potential achievement of future milestones and the potential increase of value by step functions and returns on investment. The forward-looking statements contained or implied in this press release are subject to other risks and uncertainties, including those discussed under the heading “Risk Factors” in Nano Dimension’s Annual Report on Form 20-F filed with the Securities and Exchange Commission (“SEC”) on March 11, 2021, and in any subsequent filings with the SEC. The following factors, among others, could cause actual results to differ materially from those described in the forward-looking statements: Nano Dimension’s ability to increase sales and revenue, its burn rate, and its ability to continue as a going concern. Except as otherwise required by law, Nano Dimension undertakes no obligation to publicly release any revisions to these forward-looking statements to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events. References and links to websites have been provided as a convenience, and the information contained on such websites is not incorporated by reference into this press release. Nano Dimension is not responsible for the contents of third party websites.

NANO DIMENSION INVESTOR RELATIONS CONTACT

Yael Sandler, CFO | ir@nano-di.com


Unaudited Consolidated Statements of Financial Position as at

 September 30,  December 31, 
 2021  2020  2020 
(In thousands of USD)        
Assets        
Cash and cash equivalents1,127,778  21,020  585,338 
Bank deposits257,613  16,300  85,596 
Restricted deposits165  60  62 
Trade receivables1,223  568  713 
Other receivables3,459  661  1,126 
Inventory4,035  4,032  3,314 
Total current assets1,394,273  42,641  676,149 
         
Bank deposits-  8,400  - 
Restricted deposits483  379  406 
Property plant and equipment, net7,523  4,735  5,092 
Right of use asset4,869  2,478  3,169 
Intangible assets116,767  4,633  4,440 
Total non-current assets129,642  20,625  13,107 
Total assets1,523,915  63,266  689,256 
         
Liabilities        
Trade payables1,796  842  776 
Other payables7,970  4,420  5,910 
Financial derivatives4,775  -  - 
Total current liabilities14,541  5,262  6,686 
         
Liability in respect of government grants1,910  883  850 
Lease liability3,577  1,829  2,618 
Deferred tax liabilities3,128  -  - 
Liability in respect of warrants and rights of purchase5,523  2,601  11,986 
Total non-current liabilities14,138  5,313  15,454 
Total liabilities28,679  10,575  22,140 
         
Equity        
Non-controlling interests572  -  - 
Share capital386,372  66,252  257,225 
Share premium and capital reserves1,257,980  77,535  518,426 
Treasury shares(1,509) (1,509) (1,509)
Presentation currency translation reserve1,431  1,431  1,431 
Accumulated loss(149,610) (91,018) (108,457)
Total equity1,495,236  52,691  667,116 
Total liabilities and equity1,523,915  63,266  689,256 
         
         
         


Unaudited Consolidated Statements of Profit or Loss and Other Comprehensive Income
(In thousands of USD, except per share amounts) 
  

 For the Nine-Month
Period
Ended
September 30,
  For the Three-Month
Period
Ended
September 30,
  For the Year
ended
December 31,
 
 2021  2020  2021  2020  2020 
               
Revenues2,962  1,428  1,340  438  3,399 
               
Cost of revenues1,380  890  696  301  1,563 
               
Cost of revenues - amortization of intangible772  579  281  193  771 
               
Total cost of revenues2,152  1,469  977  494  2,334 
               
Gross profit (loss)810  (41) 363  (56) 1,065 
               
Research and development expenses, net26,587  6,153  13,726  2,556  9,878 
               
Sales and marketing expenses15,023  4,224  6,301  2,475  6,597 
               
General and administrative expenses13,174  16,748  4,843  14,805  20,287 
               
Operating loss(53,974) (27,166) (24,507) (19,892) (35,697)
               
Finance income13,065  171  6,036  41  446 
               
Finance expense910  4,060  282  865  13,243 
               
Total comprehensive loss(41,819) (31,055) (18,753) (20,716) (48,494)
               
Taxes on income648  -  498  -  - 
               
Total comprehensive loss after tax(41,171) (31,055) (18,255) (20,716) (48,494)
               
Total comprehensive loss attributable to:              
               
Non-controlling interests(18) -  (18) -  - 
               
Owners of the Company(41,153) (31,055) (18,237) (20,716) (48,494)
               
Basic loss per share (after 1:50 reverse split effective June 29, 2020)(0.17) (1.11) (0.07) (0.45) (1.13)
               


Consolidated Statements of Changes in Equity (Unaudited)
(In thousands of USD)

 Attributable to owners of the Company       
 Share
capital
  Share
premium
and
capital
reserves
  Treasury
shares
  Presentation
currency
translation
reserve
  Accumulated
loss
  Total  Non-
controlling
interests
  Total
equity
 
                        
For the nine months ended September 30, 2021:                       
Balance as of January 1, 2021 257,225  518,426  (1,509) 1,431  (108,457) 667,116  -  667,116 
Issuance of ordinary shares, net123,222  711,844  -  -  -  835,066  -  835,066 
Exercise of warrants and options5,925  (2,944) -  -  -  2,981  -  2,981 
Share-based payments-  30,654  -  -     30,654  -  30,654 
Investment of non-controlling party in subsidiary-  -  -  -  -  -  590  590 
Net loss-  -  -  -  (41,153) (41,153) (18) (41,171)
Balance as of September 30, 2021 386,372  1,257,980  (1,509) 1,431  (149,610) 1,494,664  572  1,495,236 
                        
For the three months ended September 30, 2021:                        
Balance as of July 1, 2021 386,003  1,248,164  (1,509) 1,431  (131,373) 1,502,716  -  1,502,716 
Exercise of options369  (369) -  -  -  -  -  - 
Share-based payments-  10,185  -  -  -  10,185  -  10,185 
Investment of non-controlling party in subsidiary-  -  -  -  -  -  590  590 
Net loss-     -  -  (18,237) (18,237) (18) (18,255)
Balance as of September 30, 2021 386,372  1,257,980  (1,509) 1,431  (149,610) 1,494,664  572  1,495,236 
                        

Primary Logo