Delta Electronics develops high-efficiency and high-density power module products. "We apply the Power Tester 1500A to gain insight into the lifetime performance and assure the reliability of the IGBT module," said Andy Liao, section manager, Delta Electronics. "The Power Tester 600A could provide a scalable solution that would allow us to measure many discrete power devices or modules concurrently. This increased testing throughput would give us statistical failure data that we need in order to accurately predict the field lifetime of the products."
Reliability, Accuracy and Scalability Solves EV/HEV Power Electronics Thermal Issues
Designers of today's EV/HEVs are faced with significant mission-critical challenges: foremost among these is ensuring the thermal reliability of power electronics modules; detecting potential degradation of IGBTs caused by a range of standard drive cycles; and identifying the underlying damage root causes. Mentor's MicReD Power Tester 600A solution provides accurate and reliable test results that scale to real-world requirements:
- Comprehensive Diagnostics for Thermal Reliability: The MicReD Power Tester 600A product provides a simple reliability testing process for lifecycle estimation. Device set-up is easy and power cycles are fully automated. The T3Ster® "structure function" feature inside the Power Tester yields non-destructive "failure-in-progress" data for each IGBT. All diagnostic information is recorded during testing, from current, voltage and die temperature sensing, to "structure function" changes that point to reasons for failures in the package structure. Package development, reliability and batch checking of incoming parts can now be tested before production.
- Simulation Accuracy: The MicReD Power Tester 600A product can power IGBT modules through tens of thousands of cycles. This provides "real-time" failure-in-progress data for diagnostics, significantly reducing test time and eliminating the need for post-mortem or destructive failure analysis. Associated 3D CFD (computational fluid dynamics) simulation errors can be reduced from typically up to 20% to 0.5% for accurate thermal characterization of IGBTs and components due to Mentor's calibration technology solely found in the MicReD T3Ster product.
- Scalability – Tests Up to 128 IGBTs in Series: Up to eight MicReD 600A Power Testers can be chained together to allow users to power cycle up to 128 IGBTs simultaneously in a system test. The MicReD Power Tester 600A product delivers 48V under load, and users can deal with components mounted externally on cooling systems for maximum flexibility. The MicReD Power Tester 600A also meets the needs of emerging de facto EV/HEV power electronics testing best practices such as those currently being developed for the German automotive industry.
MicReD Power Tester 600A – Part of a Comprehensive Solution
Mentor Graphics is uniquely positioned as the only company that can provide a complete thermal software simulation and hardware testing solution specifically for the EV/HEV market. The MicReD Power Tester 600A product can be coupled with Mentor's leading CFD simulation technologies. Mentor's FloTHERM® and FloEFD™ 3D CFD software provide front-loading thermal simulation of power modules. When coupled with the Flowmaster® full vehicle thermo-fluid system-of-system 1D CFD modeling tool, this yields unparalleled levels of accuracy. This is done by MicReD's T3Ster technology providing CFD input material properties for automated model calibration functionality to accurately simulate the real temperature response of an EV/HEV's dynamic power input. This combination of technologies allows users to generate IGBT thermal lifetime failure estimations with the greatest accuracy possible.
"The MicReD Power Tester 600A is an extension of our total solution in automotive thermal engineering, and there is no other product like this for the EV/HEV market today," stated Roland Feldhinkel, general manager of Mentor Graphics Mechanical Analysis Division. "We have leveraged our best-in-class products to deliver a comprehensive thermal simulation and hardware test solution that meets auto maker EV/HEV industry needs while supporting the rapid growth forecast for the market in the next few years."
Product Availability
Mentor Graphics is now accepting orders for the MicReD Power Tester 600A with shipping scheduled for summer of 2016. For additional product information, please visit the company website:
www.mentor.com/powertester-600a.
About Mentor Graphics
Mentor Graphics Corporation (NASDAQ:
MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronics and semiconductor companies. Established in 1981, the company reported revenues in the last fiscal year of approximately $1.18 billion. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site:
http://www.mentor.com/.
(Mentor Graphics, Mentor, FloTHERM, Flowmaster, and T3Ster are registered trademarks, and FloEFD is a trademark of Mentor Graphics Corporation. All other company or product names are the registered trademarks of their respective owners.)
For more information, please contact:
Larry Toda
Mentor Graphics
503.685.1664
Email Contact
Photo -
http://photos.prnewswire.com/prnh/20160519/370065
Logo -
http://photos.prnewswire.com/prnh/20140317/AQ83812LOGO
To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/mentor-graphics-launches-unique-micred-power-tester-600a-solution-for-electric-and-hybrid-vehicle-igbt-thermal-reliability-300272138.html
SOURCE Mentor Graphics Corporation
| Contact: |
| Mentor Graphics Corporation
Web: http://www.mentor.com |