Wessling (Germany), October 13, 2014 -- With hyperMILL^® 2014, OPEN MIND Technologies AG is announcing a range of brand-new innovative features in addition to improvements to existing functions.One of these new features is the ‘Deformation’ module in the CAD part of the software, hyperCAD^®-S.

In hyperCAD^®-S, OPEN MIND has developed its own CAD system that is ideally matched to the CAM system hyperMILL^®. This CAM-CAD software is specifically designed to address the requirements of NC programmers. hyperCAD^®-S provides the hyperMILL^® CAM system with a modern and highly user-friendly interface.

The core of the CAD software has also been completely redeveloped. It has increased functionality in comparison with traditional CAD systems, which are customised for each individual CAD programmer.

In version 2014, hyperCAD^®-S has been improved in a number of ways. One of the new features is the ‘Deformation’ module, which opens up many new possibilities.

Targeted deformation of geometries

In hyperCAD^®-S, the user has the option to deform all geometries in accordance with requirements using the new ‘Deformation’ module. This applies to both local and global component areas. What is the benefit for CAM programmers? “It’s quite simple,” explains Konstantin Gambs, application engineer at OPEN MIND. “If warping occurs during the manufacture of thin-walled parts, for example, it is extremely useful to be able to compensate for this beforehand by making a specific change to the geometry!” This result is a part that meets the intended requirements. As an example, Gambs shows a turbine blade that has warped “a little” during production. All the CAM user needs to do is offset it in the opposite direction before generating the program. This will result in extremely accurate geometry after machining.

Another example could be sheet metal tools. After stamping, sheet metal parts exhibit a springback effect that must be compensated for in advance to ensure that accurate sheet metal parts are produced.

Another possible use is to apply existing 2D lettering to 3D geometries using volumetric deformation. In this process, selected elements (surfaces, curves, points, point clouds and meshes) are deformed volumetrically onto a target surface. There are no boundaries to user creativity.

hyperCAD^®-S contains solids

At AMB 2014, OPEN MIND will be offering a first glimpse of the latest release of hyperMILL^® version 2014.2. Solid functions in hyperCAD^®-S are just one of the new unique features. This puts the system in a position where it can edit volume models using numerous functions.

Available images

The following images are available for download in printable format at:
http://www.htcm.de/kk/openmind

 hyperCAD^®-S is the CAD innovation for CAM programmers

About OPEN MIND Technologies AG

OPEN MIND Technologies AG is a leading developer of CAM/CAD software and postprocessors for designing and manufacturing complex moulds and parts. OPEN MIND is one of the five largest providers of CAM solutions according to the NC Market Analysis Report 2014 compiled by CIMdata, a market research company.

OPEN MIND offers an extensive range of products from 2D feature-oriented solutions for milling standard parts through to software for 5axis simultaneous machining.

With their hyperMILL^® software, which is used in the automotive, tool and mould manufacturing, mechanical engineering, medical and aerospace, and watch and jewellery industries, OPEN MIND Technologies AG is represented in all the important markets in Asia, Europe and America.

OPEN MIND Technologies AG is a Mensch und Maschine company ( www.mum.de).

Additional information is available upon request or from our website at www.openmind-tech.com.

Contacts:

OPEN MIND Technologies USA, Inc. 
1492 Highland Avenue, Unit 3 
Needham MA 02492 
USA 
Phone: +1  339  225  4557 office 
Phone: +1  888  516 1232 x0 toll-free 
Fax: +1  270  912 5822 
E-mail: Email Contact

OPEN MIND Technologies UK Ltd., Oxford 
Units 1 and 2 
Bicester Business Park 
Telford Road 
Bicester 
Oxfordshire OX26 4LN 
England 
Phone: +44  1869  290 003 
Fax: +44  1869  369 429 
E-mail: Email Contact

Head office: 
OPEN MIND Technologies AG,  
Argelsrieder Feld 5, 82234 Wessling,  
Germany 
Phone: +49 8153 933-500,  
Fax: +49 8153 933-501 
E-mail: Email Contact  
website: www.openmind-tech.com

Press contact: 
HighTech communications GmbH 
Brigitte Basilio 
Grasserstrasse 1c 
80339 Munich, Germany 
Phone: +49 89 500778-20 
Fax: +49 89 500778-78 
E-mail: Email Contact 
Website: www.htcm.de