Heller to show 5-axis machining options at IMTS 2016

Aug 26, 2016 -- Heller Machine Tools will exhibit several options for productive 5-axis machining in Booth S-9174, IMTS 2016, Chicago. Heller’s 5-axis milling is centered on productivity and process dependability with a goal of establishing new standards in terms of universality, flexibility and absolute precision, according to a spokesman. With its C head, available in several machine models, a fifth axis provided by the tool forms the basis for achieving maximum process dependability.

HELLER demonstrates that system availability way above 90 percent is feasible without restrictions in terms of chip removal rate – no restrictions with Heller’s Power Cutting Universal swivel head unit. This machining unit, providing 44kW power and 242Nm torque, counts among the most powerful 5-axis spindles with HSK63 spindle taper on the market.

Also, the power provided is available at any spatial angle. As a result, the Heller machining centers  are capable of heavy-duty cutting, combined milling and drilling operations or 5-sided machining in a single setup. Even in 5-axis simultaneous milling the machine fulfils highest requirements in terms of dimensional and contouring accuracy as well as economic efficiency.

Temperature curves of a 5-axis machine inevitably vary throughout a day of production. However, due to the precise construction and thermal stability of the Heller machine, they have no influence whatsoever on its precision. This level of precision down to the µ range is provided by absolute encoded, direct measuring systems, high-resolution rotary encoders and YRT bearings with integrated measuring system. HELLER also combines this high level of precision with the required dynamics with proven 5-axis kinematics provided by the tool in X, Y, C and/or A axis and two axes provided by the workpiece in Z and B.

Editorial contact:
Dave Arnesen
Email Contact   
Tel   1-810-229-2299

Contacts:
HELLER Machine Tools
1225 Equity Drive, Troy, MI 48084
www.heller-us.com          
Email Contact

Featured Video
Jobs
GIS Specialist for Washington State Department of Natural Resources at Olympia, Washington
Business Development Manager for Berntsen International, Inc. at Madison, Wisconsin
Business Technology Analyst for Surface Water Management at Everett, Washington
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Principal Engineer for Autodesk at San Francisco, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Upcoming Events
Dimensions User Conference 2024 at The Venetian Resort Las Vegas NV - Nov 11 - 13, 2024
URISA GIS Leadership Academy at Embassy Suites Fort Worth Downtown 600 Commerce Street Fort Worth, TX - Nov 18 - 22, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise