The DTPCI32DC - Dual Clock 32bit PCI Bus Target Interface from Digital Core Design

Digital Core Design, one of the most experienced (since 1999) IP Core providers and a  System-on-Chip design house, introduced to its portfolio the DTPCI32DC. It’s a Dual Clock 32-bit PCI Bus Target Interface IP Core which meets all requirements of the PCI 3.0 specification for a target device. Moreover, it compromises a minimal gate count with a high-bandwidth data transfer.

Bytom, July the 14th, 2016 - The DTPCI32DC is a 32-bit target interface which meets all requirements of the PCI 3.0 specification for a target device. It compromises a minimal gate count with a high-bandwidth data transfer. The Core’s main feature is the presence of two clock domains. - They enable  flexibility and higher performance as well – says Tomek Krzyzak, VCEO of DCD – When  time required for implementation becomes crucial, the DTPCI32DC brings a domain crossing .

Saved time can be used for a specific system implementation instead. The user-friendly back-end interface can be very easily and effectively tailored to the design needs.

The Core supports up to six Base Address Registers and Expansion ROM address register with both I/O and Memory space decoding from 16 bytes up to 4 GB. Another important feature is a cache wrapping hardware support and a cacheline pre-fetching capability. The DTPCI32DC is accepting size cache lines which are powered from 2 up to 128. It enables also target-disconnect with data, without data or by a target abort. Moreover, the DTPCI32DC is capable to work with 66 MHz clock frequency in the most popular technologies. It assures the PCI timing requirements, as well as other parameters like FIFOs depths number or Base Address Registers (they can be easily configured at the pre-synthesis stage). 

More information & evaluation requests: http://dcd.pl/ipcore/1112/dtpci32dc/ 

Key Features:

  • — Fully supports PCI specification 3.0 protocol
  • — Stable clock domain crossing regardless of the clock frequencies
  • — Cache wrapping (cache lines must be powers of 2)
  • — User controlled burst data transfer
  • — Possible no-wait state transactions
  • — Automatic handling of configuration space read/write access
  • — Parity generation and parity error detection
  • — Single interrupt support
  • — Configurable FIFOs depth
  • — Supported backend initiated burst termination (with and without data)
  • — No tri-state buffers




Contact:

Dr Thomas Cwienk
tomeq@dcd.pl
Skype: tomasz.cwienk
Tel +48 32 282 82 66
www.dcd.pl

Featured Video
Jobs
Principal Engineer for Autodesk at San Francisco, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Senior Principal Software Engineer for Autodesk at San Francisco, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Upcoming Events
Intergeo 2024 at Messe Stuttgart Messepiazza 1 Stuttgart Germany - Sep 24 - 26, 2024
GIS-Pro 2024 at Portland ME - Oct 7 - 10, 2024
Geo Sessions 2024 at United States - Oct 22 - 24, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise