Garmin® to Appeal ITC Judgment

OLATHE, Kan. — (BUSINESS WIRE) — December 2, 2015 — Garmin International Inc., a unit of Garmin Ltd. (NASDAQ: GRMN), today announced that the International Trade Commission (ITC) issued a final determination in the investigation brought by Navico Holdings AS against Garmin. The ITC reversed an earlier decision by an administrative law judge and concluded that first generation Garmin DownVüTM scanning sonar products were too similar to at least one patented aspect of Navico DownScan technology. The ITC recommended that these Garmin products be excluded from import into the United States. The ITC also found that some asserted claims of one of Navico’s patents were invalid, that there was no infringement of one of Navico’s patents by any Garmin products, and that one Garmin scanning sonar system design did not infringe any of Navico’s patents.

“Garmin intentionally designed its products to prevent infringement of Navico’s patents. We disagree with the ITC and plan to appeal the determination,” said Andrew Etkind, Garmin vice president and general counsel. “However, as with the Johnson Outdoors ITC determination we announced in November, we have already taken steps to ensure that we can continue to provide Garmin DownVü scanning sonar products. Garmin has already designed, implemented, and manufactured an alternative design that addresses the issue in this ITC ruling.”

The ruling will have no impact on Garmin products already purchased by Garmin customers and dealers, or any products purchased going forward. The ITC expressly found that Garmin did not intend to infringe Navico’s patents. Garmin will continue to vigorously defend the non-infringing configuration of these first generation DownVü scanning sonar products through appeals and an ongoing litigation in Oklahoma. The ITC ruling applies only to Garmin and has no impact on any existing dealer inventory or any products already purchased by our customers.

The impacted transducers will be available shortly with the alternative design solution. While the redesign does address the ITC’s findings, end-users and dealers will not notice a change to user interface, installation or compatibility with existing Garmin products or accessories.

Recently, Garmin was named Manufacturer of the Year and received the honor of being the most recognized company in the marine electronics field by the National Marine Electronics Association (NMEA®). Garmin’s portfolio includes some of the industry’s most sophisticated chartplotters and touchscreen multifunction displays, sonar technology, high-definition radar, autopilots, high-resolution mapping, sailing instrumentation and other products and services that are known for innovation, reliability and ease-of-use.

For more than 25 years, Garmin has pioneered new GPS navigation and wireless devices and applications that are designed for people who live an active lifestyle. Garmin serves five primary business units, including automotive, aviation, fitness, marine, and outdoor recreation. For more information, visit Garmin's virtual pressroom at garmin.com/newsroom, contact the Media Relations department at 913-397-8200, or follow us at facebook.com/garmin, twitter.com/garmin, or youtube.com/garmin.

About Garmin International Inc. Garmin International Inc. is a subsidiary of Garmin Ltd. (Nasdaq: GRMN). Garmin Ltd. is incorporated in Switzerland, and its principal subsidiaries are located in the United States, Taiwan and the United Kingdom. Garmin is a registered trademark and DownVu is a trademark of Garmin Ltd. or its subsidiaries.

All other brands, product names, company names, trademarks and service marks are the properties of their respective owners. All rights reserved.

Notice on Forward-Looking Statements:

This release includes forward-looking statements regarding Garmin Ltd. and its business. Such statements are based on management’s current expectations. The forward-looking events and circumstances discussed in this release may not occur and actual results could differ materially as a result of known and unknown risk factors and uncertainties affecting Garmin, including, but not limited to, the risk factors listed in the Annual Report on Form 10-K for the year ended December 27, 2014, filed by Garmin with the Securities and Exchange Commission (Commission file number 0-31983). A copy of such Form 10-K is available at http://www.garmin.com/aboutGarmin/invRelations/finReports.html. No forward-looking statement can be guaranteed. Forward-looking statements speak only as of the date on which they are made and Garmin undertakes no obligation to publicly update or revise any forward-looking statement, whether as a result of new information, future events, or otherwise.

 



Contact:

Garmin International Inc.
Carly Hysell, 913-397-8200
Email Contact

 

Featured Video
Jobs
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Senior Principal Software Engineer for Autodesk at San Francisco, California
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Upcoming Events
Intergeo 2024 at Messe Stuttgart Messepiazza 1 Stuttgart Germany - Sep 24 - 26, 2024
GIS-Pro 2024 at Portland ME - Oct 7 - 10, 2024
Geo Sessions 2024 at United States - Oct 22 - 24, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise