Orbit GT showcases Volumetric Analysis using various LiDAR sources at SPAR, Co Springs

Lokeren, Belgium, April 11th, 2014. ---- Orbit GeoSpatial Technologies today announces the presentation of all new Volumetric Analysis tool for all LiDAR content at this year’s SPAR in Colorado Springs, CO, USA.

“Any LiDAR, DEM or TIN content is usefull to perform volumetric analysis.  Orbit GT is the first to present a solution that can do exactly that with LiDAR from any source : Airborne, Mobile, Terrestrial, UAS“, says Peter Bonne, VP Business Development and Senior Product Manager at Orbit GT. “Image-equipped systems can use dense image matching to create a hires DEM which feeds exactly the same way into our system.   Especially for all Mobile Maping content producers and construction and building site leaders, this tool will lift their work and make their life a lot easier.”

You can start from a Pointcloud, a DEM or TIN, either collected by UAS using Orbit UAS Mapping, by aerial LiDAR, Mobile Mapping or other.  Then define or reuse perimeters of the area at hand and choose a reference plane, Pointcloud, DEM or TIN.   Clic calculate and you’re done ! The result shows volumes that have been cut or filled, and sums up totals per perimeter.  An output DEM colors the cut and fill areas. Check in 2D/3D view, then export all values to clipboard or file.

Volumetric Analysis settings can be saved, reused, exported. Volumetric Analysis is an add-on to the Orbit Mobile Mapping v11 Extraction solution.

About Orbit GeoSpatial Technologies

Orbit Geospatial Technologies is world leader in solutions for exploiting Mobile Mapping, UAS and Aerial Mapping data in managing, viewing, extracting, publishing, sharing and embedding in workflows. Orbit GT is headquartered in Lokeren, Belgium.


Contact:

Mr. Peter Bonne
VP Business Development
Orbit GeoSpatial Technologies
Industriepark E17, 2021
9160 Lokeren
Belgium
Phone:+32 9 340 5757
Fax: +32 9 340 5750
www.orbitgis.com

Featured Video
Jobs
Business Development Manager for Berntsen International, Inc. at Madison, Wisconsin
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Principal Engineer for Autodesk at San Francisco, California
Mechanical Engineer 3 for Lam Research at Fremont, California
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Machine Learning Engineer 3D Geometry/ Multi-Modal for Autodesk at San Francisco, California



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise