Delcam to show latest CAM software at GTMA Manufacturing UK at Mazak
[ Back ]   [ More News ]   [ Home ]
Delcam to show latest CAM software at GTMA Manufacturing UK at Mazak

Mar 5, 2015 -- Delcam will highlight the benefits of five-axis programming with its PowerMILL CAM system and feature-based programming with its FeatureCAM software at the GTMA’s Manufacturing UK event to be held at Mazak’s European Headquarters in Worcester on 23rd April.  In addition to the exhibition by GTMA members, the event will include a seminar with keynote speakers from Cosworth Engineering and Messier Dowty.  To register as a visitor, please visit www.manufacturinguk.net.

To see a video showing how Delcam software can be used to program Mazak machine tools, please go to www.delcam.tv/delcammazak

The latest release of PowerMILL includes improvements to the Vortex high-efficiency area-clearance strategy, developments in toolpath simulation and verification, improved collision checking to also cover near misses, and more efficient raster finishing, area clearance and drilling, plus more options for customisation by users.   

Complete verification can now be undertaken of a project for machine-tool issues such as collisions, saving considerable time compared to undertaking verification of each individual toolpath in turn.  Comprehensive verification is performed, including ensuring that the machine tool is capable of running the proposed strategy, as well as checking for both machine-tool collisions and tooling collisions.  A detailed list is generated of any problems found so that these can be fixed on a case-by-case basis.

FeatureCAM was the world’s first feature-based programming software when it was launched in 1995.  Constant development since then has ensured that the system has retained its leadership in programming speed and ease of use, while an increased range of strategies has been added to provide more efficient toolpaths giving greater productivity on a wider range of machines, including lathes, mills and mill-turn machines. 

The 2015 R2 release incorporates a milling calculator to help users obtain the maximum benefit from the Vortex high-efficiency area-clearance strategy.  Other enhancements, among the 280 customer-requested improvements since the initial 2015 release last September, include the ability to create multi-tool blocks within machine designs, better control over toolpath output and more efficient automatic selection of tools. 

Image - This salt and pepper set was produced on
a Mazak Integrex programmed with Delcam’s FeatureCAM
CAM software

For further information on Delcam’s range of CAM systems, please contact:-

Peter Dickin
Marketing Manager
Direct phone: 44 (0)121 683 1081                 
e-mail: Email Contact

Delcam Ltd  
Small Heath Business Park, Birmingham, B10 0HJ, UK
www.delcam.com