TTM Technologies, Inc. Reports Fiscal First Quarter 2019 Results

COSTA MESA, Calif., May 01, 2019 (GLOBE NEWSWIRE) -- TTM Technologies, Inc. (NASDAQ:TTMI), a leading global printed circuit board (“PCB”) and radio frequency (“RF”) components manufacturer, today reported results for the first quarter of fiscal 2019, which ended on April 1, 2019.

First Quarter 2019 Highlights

  • Net sales were $620.2 million
  • GAAP net income was a loss of $3.3 million, or ($0.03) per share
  • Non-GAAP net income was $16.4 million, or $0.16 per diluted share, inclusive of $0.03 of foreign exchange losses
  • Cash flow from operations of $36.9 million
  • Repaid $30 million of our Term Loan B

First Quarter 2019 Financial Results
Net sales for the first quarter of 2019 were $620.2 million, compared to $663.6 million in the first quarter of 2018 and $711.0 million in the fourth quarter of 2018.

GAAP operating income for the first quarter of 2019 was $17.5 million, compared to $30.0 million in the first quarter of 2018 and $42.8 million in the fourth quarter of 2018. 

GAAP net income for the first quarter of 2019 was a loss of $3.3 million, or ($0.03) per share.  This compares to income of $10.1 million, or $0.09 per diluted share, in the first quarter of 2018 and $52.5 million, or $0.42 per diluted share, in the fourth quarter of 2018. 

On a non-GAAP basis, net income for the first quarter of 2019 was $16.4 million, or $0.16 per diluted share. This compares to non-GAAP net income of $28.0 million, or $0.26 per diluted share, for the first quarter of 2018 and $55.0 million, or $0.52 per diluted share, in the fourth quarter of 2018.

Adjusted EBITDA for the first quarter of 2019 was $78.5 million, or 12.7 percent of net sales, compared to adjusted EBITDA of $83.2 million, or 12.5 percent of net sales, for the first quarter of 2018 and $117.4 million, or 16.5 percent of net sales, for the fourth quarter of 2018.

“For the first quarter, TTM generated good cash flow and delivered earnings within the previously guided range, despite weakness in some of our commercial end markets,” said Tom Edman, CEO of TTM.  “We were pleased to see solid year over year growth from the aerospace and defense end market that partially offset weakness in our cellular and automotive end markets.  We expect softness in the commercial markets to continue in Q2 and plan to address this challenge with the same discipline we have demonstrated in the past.  At the same time, we will continue to be focused on cash flow generation and our strategic goals of diversification and differentiation.”

Business Outlook
For the second quarter of 2019 TTM estimates that revenue will be in the range of $610 million to $650 million, and non-GAAP net income will be in the range of $0.15 to $0.21 per diluted share.

To Access the Live Webcast/Conference Call
TTM will host a conference call and webcast to discuss first quarter 2019 results and second quarter 2019 outlook on Wednesday, May 1, 2019, at 4:30 p.m. Eastern Time (1:30 p.m. Pacific Time).  The conference call will include forward-looking statements.

Telephone access is available by dialing domestic 800-667-5617 or international 334-323-0509 (ID 2910354).  The conference call also will be webcast on TTM’s website at www.ttm.com.

To Access a Replay of the Webcast
The replay of the webcast will remain accessible for one week following the live event on TTM’s website at www.ttm.com.

About TTM
TTM Technologies, Inc. is a leading global printed circuit board manufacturer, focusing on quick-turn and volume production of technologically advanced PCBs, backplane assemblies and electro-mechanical solutions as well as a global designer and manufacturer of RF and microwave components and assemblies. TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at www.ttm.com.

Forward-Looking Statements
This release contains forward-looking statements that relate to future events or performance. TTM cautions you that such statements are simply predictions and actual events or results may differ materially. These statements reflect TTM's current expectations, and TTM does not undertake to update or revise these forward looking statements, even if experience or future changes make it clear that any projected results expressed or implied in this or other TTM statements will not be realized. Further, these statements involve risks and uncertainties, many of which are beyond TTM's control, which could cause actual results to differ materially from the forward-looking statements. These risks and uncertainties include, but are not limited to, general market and economic conditions, including interest rates, currency exchange rates and consumer spending, demand for TTM's products, market pressures on prices of TTM's products, warranty claims, changes in product mix, contemplated significant capital expenditures and related financing requirements, TTM's dependence upon a small number of customers and other factors set forth in the "Risk Factors" and "Management's Discussion and Analysis of Financial Condition and Results of Operations" sections of the Company's public reports filed with the SEC.

About Our Non-GAAP Financial Measures
This release includes information about TTM’s adjusted EBITDA, non-GAAP net income and non-GAAP earnings per share, all of which are non-GAAP financial measures. TTM presents non-GAAP financial information to enable investors to see TTM through the eyes of management and to provide better insight into TTM’s ongoing financial performance. 

A material limitation associated with the use of the above non-GAAP financial measures is that they have no standardized measurement prescribed by GAAP and may not be comparable to similar non-GAAP financial measures used by other companies.  TTM compensates for these limitations by providing full disclosure of each non-GAAP financial measure and reconciliation to the most directly comparable GAAP financial measure.  However, the non-GAAP financial measures should not be considered in isolation from, or as a substitute for, financial information prepared in accordance with GAAP.

With respect to the Company’s outlook for non-GAAP net income per diluted share, we are unable to predict with reasonable certainty or without unreasonable effort certain items that may affect such measure calculated and presented in accordance with GAAP. Our expected non-GAAP net income per diluted share excludes primarily the future impact of restructuring actions, impairment charges, unusual gains and losses, and tax adjustments. These reconciling items are highly variable and difficult to predict due to various factors outside of management’s control and could have a material impact on our future period net income per diluted share calculated and presented in accordance with GAAP.  Accordingly, a reconciliation of non-GAAP net income per diluted share to such measure calculated and presented in accordance with GAAP is not available without unreasonable effort and has not been provided.

Contact:
Sameer Desai,
Senior Director, Corporate
Development & Investor Relations
Sameer.desai@ttmtech.com 
714-327-3050

- Tables Follow –

TTM TECHNOLOGIES, INC.
Selected Unaudited Financial Information
(In thousands, except per share data)
           
      First Quarter Fourth Quarter
           2019       2018       2018  
                     
CONSOLIDATED CONDENSED STATEMENTS OF OPERATIONS            
                     
  Net sales     $ 620,200     $ 663,582     $ 710,955  
  Cost of goods sold     531,515       574,904       588,323  
                     
  Gross profit     88,685       88,678       122,632  
                     
  Operating expenses:            
    Selling and marketing     18,901       17,628       18,533  
    General and administrative     35,023       34,127       39,615  
    Amortization of definite-lived intangibles     16,826       5,861       17,722  
    Restructuring charges     445       1,061       3,962  
      Total operating expenses     71,195       58,677       79,832  
                     
  Operating income     17,490       30,001       42,800  
                     
  Interest expense     (21,688 )     (13,747 )     (22,533 )
  Other, net       (530 )     (1,107 )     2,357  
                     
  Income (loss) before income taxes     (4,728 )     15,147       22,624  
  Income tax (provision) / benefit     1,476       (5,050 )     29,858  
                     
  Net income (loss)   $ (3,252 )   $ 10,097     $ 52,482  
                     
  Earnings per share:            
    Basic     $ (0.03 )   $ 0.10     $ 0.51  
    Diluted     $ (0.03 )   $ 0.09     $ 0.42  
                     
  Weighted-average shares used in computing per share amounts:            
    Basic       104,315       102,508       103,683  
    Diluted       104,315       107,517       131,533  
                     
                     
  Reconciliation of the numerator and denominator used to calculate basic earnings per share and diluted earnings per share:    
                     
  Net income           $ 52,482  
    Add back items: interest expense, net of tax             3,030  
  Adjusted net income           $ 55,512  
  Weighted-average shares outstanding             103,683  
  Dilutive effect of convertible debt             25,939  
  Dilutive effect of warrants             -  
  Dilutive effect of performance-based stock units, restricted stock units & stock options             1,911  
  Diluted shares             131,533  
  Earnings per share:            
    Basic             $ 0.51  
    Diluted             $ 0.42  
                     

1 | 2 | 3 | 4  Next Page »
Featured Video
Jobs
GIS Analyst for San Bernardino County Transportation Authority at San Bernardino, California
Geodetic Analyst, GIS Center (1282) for Idaho State University at Pocatello, Idaho
GEOGRAPHIC INFORMATION SYSTEM (GIS) COORDINATOR for Lassen County at Susanville, California
Mechanical Engineer for PTEC Solutions at Fremont, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Upcoming Events
Esri User Conference 2024 at san diego CA - Jul 15 - 19, 2024
URISA GIS Leadership Academy at Chicago IL - Aug 12 - 16, 2024
Commercial UAV Expo 2024 at Caesars Forum Las Vegas NV - Sep 3 - 5, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise