Cadence Introduces Innovus Implementation System, Delivering Best-in-Class Results with Up to 10X Reduction in Turnaround Time

- Provides typical 10 to 20 percent production-proven advantage in power, performance and area

SAN JOSE, Calif., March 10, 2015 — (PRNewswire) —  Cadence Design Systems, Inc. (NASDAQ: CDNS) today unveiled Cadence® Innovus Implementation System, its next-generation physical implementation solution that enables system-on-chip (SoC) developers to deliver designs with best-in-class power, performance and area (PPA) while accelerating time to market. Driven by a massively parallel architecture with breakthrough optimization technologies, the Innovus Implementation System provides typically 10 to 20 percent better PPA and up to 10X full-flow speedup and capacity gain at advanced 16/14/10nm FinFET processes and established process nodes.

Cadence Logo.

For more information on the Innovus Implementation System, please visit http://www.cadence.com/news/innovus.

The Innovus Implementation System was designed with several key capabilities to help physical design engineers achieve best-in-class performance while designing for a set power/area budget or realize maximum power/area savings while optimizing for a set target frequency. The key Innovus capabilities to achieve this include: 

  • New GigaPlace solver-based placement technology that is slack-driven and topology-/pin access-/color-aware, enabling optimal pipeline placement, wirelength, utilization and PPA, and providing the best starting point for optimization
  • Advanced timing- and power-driven optimization that is multi-threaded and layer aware, reducing dynamic and leakage power with optimal performance
  • Unique concurrent clock and datapath optimization that includes automated hybrid H-tree generation, enhancing cross-corner variability and driving maximum performance with reduced power
  • Next-generation slack-driven routing with track-aware timing optimization that tackles signal integrity early on and improves post-route correlation
  • Full-flow multi-objective technology enables concurrent electrical and physical optimization to avoid local optima, resulting in the most globally optimal PPA

The Innovus Implementation System also offers multiple capabilities that boost turnaround time for each place-and-route iteration. Its core algorithms have been enhanced with multi-threading throughout the full flow, providing significant speedup on industry-standard hardware with 8 to 16 CPUs. Additionally, the Innovus Implementation System features the industry's first massively distributed parallel solution that enables the implementation of design blocks with 10 million instances or larger. Multi-scenario acceleration throughout the flow improves turnaround time even with an increasing number of multi-mode, multi-corner scenarios.

In addition to providing best-in-class PPA and optimized turnaround time, the Innovus Implementation System offers a common user interface (UI) across synthesis, implementation and signoff tools, and data-model and API integration with the Tempus Timing Signoff solution and Quantus QRC Extraction solution. Together these solutions enable fast, accurate, 10nm-ready signoff closure that facilitates ease of adoption and an end-to-end customizable flow. Customers can also benefit from robust visualization and reporting that enables enhanced debugging, root-cause analysis and metrics-driven design flow management.

"At ARM, we push the limits of silicon and EDA tool technology to deliver products on tight schedules required for consumer markets," said Noel Hurley, general manager, CPU group, ARM. "We partnered closely with Cadence to utilize the Innovus Implementation System during the development of our ARM® Cortex®-A72 processor. This demonstrated a 5X runtime improvement over previous projects and will deliver more than 2.6GHz performance within our area target. Based on our results, we are confident that the new physical implementation solution can help our mutual customers deliver complex, advanced-node SoCs on time."

"Customers have already started to employ the Innovus Implementation System to help achieve higher performance, lower power and minimized area to deliver designs to the market before the competition can," said Dr. Anirudh Devgan, senior vice president of the Digital and Signoff Group at Cadence. "The early customers who have deployed the solution on production designs are reporting significantly better PPA and a substantial turnaround time reduction versus competing solutions."

About Cadence

Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers and research facilities around the world to serve the global electronics industry. More information about the company, its products and its services is available at http://www.cadence.com/.

© 2015 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence and the Cadence logo are registered trademarks and Innovus, Quantus and Tempus are trademarks of Cadence Design Systems, Inc. in the United States and other countries. ARM and Cortex are registered trademarks of ARM Limited (or its subsidiaries) in the EU and/or elsewhere. All rights reserved. All other trademarks are the property of their respective owners.

For more information, please contact:
Cadence Newsroom
408-944-7039
Email Contact

Logo - http://photos.prnewswire.com/prnh/20140102/SF39436LOGO

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/cadence-introduces-innovus-implementation-system-delivering-best-in-class-results-with-up-to-10x-reduction-in-turnaround-time-300047125.html

SOURCE Cadence Design Systems, Inc.

Contact:
Cadence Design Systems, Inc.
Web: http://www.cadence.com

Featured Video
Jobs
Mechanical Engineer for PTEC Solutions at Fremont, California
Upcoming Events
Esri User Conference 2024 at san diego CA - Jul 15 - 19, 2024
URISA GIS Leadership Academy at Chicago IL - Aug 12 - 16, 2024
Commercial UAV Expo 2024 at Caesars Forum Las Vegas NV - Sep 3 - 5, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise